How To Get People To Like Marshmallow Production Line.

2021/02/24

A marshmallow is a kind of candy with a stable bubble structure. Marshmallow extrusion molding line is production equipment which is composed of syrup boiling, mixing and stirring, fast cooling, continuous inflation, and extrusion molding, and automatic cutting in one, which is to shear and emulsifies the syrup containing gelatin at high speed. It is made into the regular, soft, and tasty marshmallow. It makes consistent product quality, proper specific gravity, right granularity, loose textured honeycomb structure and uniform delicate pores, and elastic shape.

 

 

The marshmallow pressed to a specific thickness are filled, folded, cut to the required block of finished products, and then sent to the automatic packaging mechanism through the packaging conveyor belt to make the factory products. Because of changing the traditional marshmallow production method, one machine can replace many devices, hand over the manual operation for high-speed and efficient automatic production, and no waste gas pollution to ensure the marshmallow food manufacturing health environment.

 

So this is a new type of cotton candy multi-layer production automatic molding machine with small volume, manufacturing, low production cost, high production efficiency, and low energy consumption.

 

Hopper motor drive device with wind blade multi-layer type rotating adjustable disc pressure roller mesh conveyor belt rolling compound cutting forming device

Humidity controller for electrical dual-use sugar dispenser relative humidity measurement, display, and alarm, measurement, and control, relative humidity control range of 25%-99% RH, the measurement accuracy of ± 1.5% RH, when the relative humidity is lower than the limit value, it will sound and light alarm, and at the same time automatically start the water vapor generator, and automatically stop the water vapor generator when it reaches the set high relative humidity limit value. The combustible gas alarm is composed of a control unit and sensor. The sensor has a range of 0-100% LEL for butane, response time ≤ 30s, and accuracy ≤ ±5% LEL. The control unit is used to set the explosive gas alarm value. When the fierce gas concentration exceeds the alarm value, sound and light alarms are issued, and the forced ventilation system is started simultaneously.

 

The motor speed regulator adjusts the current or voltage through the motor to realize the control of motor speed. The speed value displayed on the instrument panel is essentially a display of the current or voltage digital-to-analog conversion value. It does not represent the real speed of the motor. The motor speed regulator of the sugar reel adjusts the current through the engine to realize the control of the motor speed. The rate displayed on the instrument panel is essentially a display of the current analog quantity and does not represent the real speed of the motor.

The fixed tube outside the central rotating box The frozen tube inside the mid rotating tube Power line tube Feeding tube Top cover Turntable electric heating tube bracket Electric heating tube air leaves Fine wire mesh bottom plate.

 

Taiwan utility model No. 78202635 "a cotton candy molding machine structure improvement" described features are mainly in the traditional cotton candy molding machine rotary disc circumference cut with the circumference of the tangent into 15 ~ 20 ° vertical long hole, so that the dissolved sugar by the rotary disc centrifugal force and the rim of the tangent acceleration and shot out Outside the rotating disk, at the same time with the direction of rotation marshmallow in the collection tank to form a ring of strips, by the manual removal and then for the next process of processing. The heating source is, due to the heating with the jet bottom plate, the base plate is not uniformly heated, and the quality of marshmallow is challenging to control. Its production form is still the traditional manual marshmallow production method, with low production efficiency and challenging to guarantee the product quality, and cannot form an automatic production line.

 

Simultaneously, the downward wind pressure generated by the wind blade in the high-speed rotation will blow the shredded marshmallow to the lower mesh conveyor belt, which will be loosened. The shredded marshmallow will be pressed to a specific thickness through the triangle-shaped adjustable press roller and continue to be sent to the next rolling compound cutting and forming device. The marshmallows stuffed to a particular thickness are filled, folded, and cut to the desired block, and then sent to the automatic packaging mechanism through the packaging conveyor belt to make factory products.

 

This utility model provides the cotton candy multi-layer production automatic forming machine mainly consists of motor drive device, hopper, multi-layer rotating disk with a wind blade, electric heater, adjustable pressure roller, mesh conveyor belt, rolling compound cutting off forming apparatus. The motor drive device is in the upper part of the rotating disk. The synchronous high-speed rotating air blade can blow the marshmallows shot out by the rotating disk's centrifugal force to the lower mesh conveyor belt. Therefore, multiple layers of the rotating disk can be set up according to the need to produce one or more colors of marshmallow products continuously. An automatic production line can be formed. Therefore, a new type of automatic marshmallow multi-layer production machine with high efficiency and low energy consumption can guarantee the high quality of products by changing the traditional marshmallow production method.

 

marshmallow production line 

 

The air leaves are evenly connected to the periphery of the upper cover; the fine wire mesh is fixed outside the turntable, the bottom plate is fixed with screws and connected to the bottom of the lower turntable, the parts of the multi-layer rotating disk with air leaves can be easily disassembled and assembled, its maintenance and repair are straightforward and convenient.

 

Hopper motor drive device with wind blades of the multi-layer rotating disk adjustable pressure roller mesh conveyor belt rolling compound cutting molding device

The following is combined with the accompanying drawings and specific examples of the utility model for further explanation.

 

Because this structure can set up a multi-layer rotating disk, the melting room is heated evenly by an electric heating tube in layers, and the feeding tube conveys granulated sugar in layers; therefore, by adding additives, one or more colors of marshmallow can be produced separately, one machine replaces many machines, and the production efficiency is increased exponentially. Meanwhile, the upper cover's wind blade can spray subtle filament marshmallows continuously concentrated to the mesh conveyor belt, thus forming a guarantee. This results in a high-speed, efficient automatic marshmallow production machine that guarantees high product quality.

 

 

The fixed tube outside the central rotating box the central rotating tube the frozen tube inside the central rotating tube the power line tube, the filling tube, the upper cover, the turntable, the electric heating tube bracket, the electric heating tube, the wind blade the fine silk net bottom plate.

 

Said combined chassis includes skeleton caster side panels and bottom plate. The articulated skeleton is rectangular, side plate capped on the four sidewalls of the structure, the bottom plate is mounted on the base of the frame, each part is connected using clips and screws for locking, the four corners of the skeleton are installed with casters mainly to facilitate transportation, maintenance, parts replacement.

 

The said electrical dual-use sugar dispenser is installed on the working surface of the combined chassis, the motor is installed on the lower part of the electrical dual-use sugar dispenser, and the motor output shaft is connected with the connection shaft of the electrical dual-use sugar dispenser; the said liquefied gas storage tank is installed on the combined chassis, and the liquefied gas storage tank is connected with the gas source inlet of the electrical dual-use sugar dispenser through a pipe.

 

Said control panel is mounted on the combined chassis. The control panel is connected to the electrical dual-use sugar dispenser and the electric motor through wires to control the electrical dual-use sugar dispenser's action. The said windshield is mounted on the combined case's work surface and surrounds the perimeter of the electrical dual-use sugar dispenser's outlet.

 

If you need help from our engineers, click here to contact us.